Interview
Configuration and Quotation
Description of Goods | Quantity | Price | Remark | |
1 | SJ65/30 Single Screw Extruder (Vacuun loader+Hopper dryer) | One set | FOB | ABB inverter OMRON temp Controller SCHNEIDER Contactor |
2 | Corrugator with vacuum design | One set | ||
3 | 90mm Moulds (Vacuum design) | One set | ||
4 | 20-90mm Single Station Coiler | One set | ||
Need to know how many size mould | Option | |||
Payment term :30% of total amount should be paid by T/T as downpayment ,the balance 70% should be paid before delivery by T/T. | ||||
Service Condition
Voltage | 380V/3P/50HZ |
Material | PP/PE granules |
Diameter range | 20-90mm |
SJ-65/30 Single Screw Extruder
Speed frequency regulator ABB Screw 1. Screw diameter : 65mm The length and diameter ratio of screw : 30:1 Material of screw: 38CrMoALA ,under nitrogen treatment The depth of nitrogen layer of screw: 0.4-0.6mm,hardness: HV>740 Barrel1.The material of barrel: 38CrMoALA,under nitrogen treatment The depth of nitrogen layer of barrel : 0.5-0.7mm,hardness: HV>940 Barrel heating : 3 heating section , Material of heating circle :stainless steel, heating power:4kw*4 sections Barrel cooling:4cooling section, cooling power:0.18kw*4sections(fan blower ) MotorDriving motor power : 30kw The capacity of extruder 100kg/h Reduction gearboxSpeed reducer is of hard tooth surface, and material of gear is 20CrMoTi under nitrogen, quenching and grinding treatment, and also equipped with outer cooling device. The device has strong loading capacity, stable transmission, low noise and high efficiency, etc. |
Die head and Mouth Mould
Mode: | with changeable mouth mould and core mould |
Mould material and runner surface: | 40C and 40CoMoPort chrome by polishing |
Mouth mould: | 38CrMoA1A |
Calibration sleeve: | Stainless steel |
Mould heating: | Cast aluminum |
Mould structure pattern: | spiral split structure design, disassembling convenient |
Adjustment of mouth mould: | Circumferential screw adjusting |
![]() | |
Corrugator with vacuum design
Template quantity | 1pcs | |
Template material | 45# steel after high frequency quenching | |
Cooling method | Air and Water | |
There is water through template,to make sure mould temp fast cold. Water can be recycled us,save consumption | ||
Air cooling | Air blower 7sets | |
Air blower power | 250W/Set | |
Transmission mode | Gear transmission | |
Main motor power | 3KW | |
Speed | 0-10meters/minute | |
Controller | ABB speed frequency controller | |
Vacuum pump | 5.5KW | |
Lubrication | Auto | |
The mold adopts an oil auto lubrication to prevent the lubricating oil on the mold from entering the outer surface of the bellows and soiling the bellows | ||
The molding die channel adopts a fully enclosed form to reduce the entry of foreign matter into the molding die. | ||
Forward and back moving rail material : Linear guide | ||
Meter counting device | Auto length counting | |
Cover | Have cover | |
Pipe guider | Have Guider | |
| ||
Electric parts

ABB Converter OMRON temperature control meter SCHNEIDER contactor
20-90mm Single Station Coiler
Working position Single working position |
|
Arrangement of pipe Auto line-arrangement device | |
Motor The model of motor : moment electrical motor | |
Coiling mode counting device | |
Suit to coil pipe 20-90mm | |
Speed 1-10M/minute | |
Discharge method Pneumatic control |
Spare parts:
Spare moulds | 2pcs/each diameter |
Vacuum meter | 1pcs |
Air tap | 1 pcs |
Die head heating circle | 1 set |
Die head wrench | 1 pcs |
Air pipe | 5meters |
Water pipe | 5meters |




Copy product links
Long by picture save/share
