MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
Bottle Blowing Machine Offer
Date:2023.04.07
No | Item | Capacity | Qty | Unit price（$） | Total Price（$） |
1 | Manual blowing machine | Max 2L | 1set | ||
Heater | |||||
2 | Manual blowing machine | Max 5L | 1set | ||
Heater | |||||
3 | Manual blowing machine | 5 gallon bottle | 1set | ||
1 outside heater, 1 inside heater | |||||
4 | Spare Parts | 1set | |||
Total Amount(EXW) | |||||
Bottle Blowing Machine Features: 1. Touch screen design for control panel 2.Aluminum material for preform holder 3.Three valve control(preblow,mainblow,exhaust) 4.Independent Japan PLC Control | |||||
Machine introduction
1.Bottle Blowing System
1.1Semi automatic bottle blowing machine
It can used for blowing different application bottle, such as oil bottle, water bottle, cosmetic bottle,condiment bottle,etc
Machine Parameter
2L Blowing machine
| |||
Blow pressure(MPa) | 2-3 | Work pressure(Mpa) | 0.8-1 |
Avg Capacity | 600-700BPH | Bottle volume(L) | Max 2L |
Dimension(mm) | 1800*660*1650 | Voltage(V/Hz) | AC220/50 |
Neck Diameter(mm) | 20-60mm | Weight(Kg) | 800 |
2L Heater | |||
Voltage(V/Hz) | 3 Phase 4 Wire AC380/50 | Capacity(pcs/h) | 800-1000 |
Power(Kw) | 16.5 | Preform thickness(mm) | Under 4mm |
Weight(Kg) | 300 | Dimension(mm) | 1700*650*1450 |
5L Blowing machine
| |||
Blow pressure(MPa) | 2-3 | Work pressure(Mpa) | 0.8-1 |
Avg Capacity | 200-900BPH | Bottle volume(L) | Max 5L |
Dimension(mm) | 1900*660*1650 | Voltage(V/Hz) | AC220/50 |
Neck Diameter(mm) | 20-60mm | Weight(Kg) | 900 |
5L Heater | |||
Voltage(V/Hz) | 3 Phase 4 Wire AC380/50 | Capacity(pcs/h) | 800-1000 |
Power(Kw) | 16.5 | Preform thickness(mm) | Under 4mm |
Weight(Kg) | 300 | Dimension(mm) | 1700*650*1450 |
5 gallon Blowing machine 20L
| |||
Blow pressure(MPa) | 2-3 | Work pressure(Mpa) | 0.8-1 |
Avg Capacity | 70-90BPH | Bottle volume(L) | Max 20L |
Dimension(mm) | 2250*780*1850 | Voltage(V/Hz) | AC220/50 |
Neck Diameter(mm) | 20-60mm | Weight(Kg) | 1300 |
5 gallon Heater | |||
Voltage(V/Hz) | 3 Phase 4 Wire AC380/50 | Capacity(pcs/h) | 800-1000 |
Power(Kw) | 56 | Preform thickness(mm) | Under 8mm |
Weight(Kg) | 400 | Dimension(mm) | 2600*700*1850 |
Main electrical parts and components list
No. | Name | Brand |
A：Pneumatic System | ||
1 | Stretch&Seal Valve | Taiwan Airtac |
2 | Blow Solenoid Valve | China Quality Brand |
3 | Stretching Cylinder | China Quality Brand |
4 | Clamping Cylinder | China Quality Brand |
5 | Clamping Frame Structure | Cast iron |
B：Electric System | ||
1 | PLC | Japan Mitsubishi |
2 | Infrared Heating Lamp | China Quality Brand |
3 | Touch Screen | China Quality Brand |
4 | Relay | China Quality Brand |
5 | Power Switch | China Quality Brand |
6 | Silicon Controlled Rectifier | China Quality Brand |
Free Spare Parts List
No. | Name | Quantity |
1 | Seal Cushion | 2PCS |
2 | Infrared Lamp | 5PCS |
3 | Grease Gun | 1PCS |
4 | Tool Box | 1PCS |
ARTICLE 1.
FOB China.
- Delivery time: The Seller will hand over the goods to the buyer after 50 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment,from the day confirm the sample draw(if have)
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l Specifications and functions of the machine match the content of this contract.
l Electrical, mechanical and control systems run smoothly.
l Run out sample products as required.
l Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
3 The buyer pays the seller under Article 4 of this contract.
4 The expenses such as other expenses for foreign engineers in china will be paid by the Seller.
ARTICLE 5: SELLER'S LIABILITY
1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
