OG-1100x1250 Fully-automatic PS Foam Food Container Forming Machine

Automatic Control Cabinet

1 set

Function: PLC Control the total machine working and each part have button to operature. All the setting parameter will be showed on the screen panel as like our smart phone. It is easy for operating and checking each part.

Automatic Temperature Control Cabinet

1 set

Function: There are two heating zones. One is at top and one is at bottom. Then there are two temperature control cabinet which can show the top and bottom temperature of each small part. You also can set the temperature and show you the real temperature at panel. By adjusting the temperature, we can produce different quality required products.

PLC Controller

Touch Screen 

Adopt Taiwan brand

Function:  There is program at the PLC and it will be showed on the screen panel. We can set it to be different language so that different people from different country can operate it easily.

2.Automatic Feeding device

1 set Feeding length can be adjusted.

Function: There are two rolls for feeding. When the first roll is finished, the second roll can be soon prepared for feeding. There is sensor to set the feeding length.

3.Heating System

   2Sets

Function: There is top and bottom heating system to heat the PS roll. It can be pushed out when the power is off so that the PS Roll can not be heated too long time to get fire.

 Subsidiary Heating Zone /2 sets

Adopt the far infrared radiation tile.

4. Forming System

Adopt hydraulic cylinder drive

Function: It is controlled by hydraulic station up and down. There is up and down mold for forming. By changing different mold, we can get different type products.

Motor

2 sets 7.5kw

Hydraulic Stations

2 sets

Function: Control the up and down mold up and down to form.

Vacuum Forming Press

60T.

Forming Area

1040mm×1250mm

Vacuum Forming Speed 

3-8s/mold.

5.Cutting off System

Adopt hydraulic drive

Function: Cutting off mold is mainly used to cut the product separate with the total PS Formed Sheet.

Motors

1 set 18.5kw

Hydraulic station

1 set

Function: Control the cutting off mold up and down to let each product separate with the PS Formed Sheet.

Max. Punching

100T

Cutting off area

1040mmx1250mm

Cutting off speed

3-8 s/mould

6.Stacking System

Function: After forming and cutting the ps foam products separate with the total PS Formed Sheet, There are still some connection point to connect with the ps sheet. Then stacking mold will suck the products out and then put them on the working tables for steadily. It is easy for packing and counting.Counting can be set at PLC.

Pneumatic Control

Automatically Stack

Adjustable, as customers’ need

Automatic Counting System

Adjusted, according to the customers’ need

Automatically Conveyor

7.Scrap Rolling System

Automatically

Function: After forming, cutting off and stacking the products on the worktable, the left are waste scraps. It will be winding to be a roll by this rolling system.

8.Installation Power:

180kw

9. Power Supply

3 phases 4-line 380V 50Hz

10.Weight:

12 T