MR ALADDIN : 18816899059@163.com
MR AU: auvuchi@163.com
0086-18816899059
0086-15018408881
PET STRAPS EXTRUDER MACHINE
Interview
Product Detail
PET STRAPS EXTRUDER MACHINE
一、Amount and Payment Term
1、The Total Amount of this set of equipment
2、If Buyer need Seller to send technicians to serve overseas, all the related cost would be covered by Buyer,and 150.00usd/Day per person will need to be paid if working controlled within 7 Days, otherwise 200.00usd/Day per person will need to be paid from the 8th Day.
3、Payment term：30% deposit in advance, 70% before delivery (T/T or Cash)
4、Delivery Date: 90 Working Days after Deposit received.
5、One Year Warranty, Lifelong time’s Maintenance.
6、Seller arranges free Machine Testing and Free Technical Training in Seller's Factory(Mainland China only).
二、The Specification & Technical Parameter of the mentioned Production Line as following:
Item No.: (PLC control) Suitable Raw-Material: Bottle flakes & Scrap Straps Strap width Range:9-25mm/Thickness: 0.5-1.3 mm Production Capacity: ≤250/H（refer to 16mm/0.8-1.0mm） Extruding Strap PCS: 1-2PCS(depends on strap gram/meter) Strap Grade: Full Automatic Machine Install Size: L55000*W2500*H7000mm Power: 3Phase/380V/50Hz Water: clean recycle cool water 6PA air compressor Direction:TBC | 型号：(PLC控制) 适用原料：PET瓶片和废打包带 带宽范围：:9-25mm 带厚范围0.5-1.3 mm 产能：≤250/H（参考16mm/0.8-1.0mm） 挤出条数：1-2PCS(根据克重) 带子等级：全自动 设备安装尺寸：L55000*W2500*H7000mm 电压：3Phase/380V/50Hz 水：干净循环水 气：6PA 设备方向：待定
|
1-Raw material Pre-Dry and Mixing Section One set of Screw Type raw material Loading Machine, H3.2m(Ø219mm) (Advantage: Quick +constantly feeding without stuck) Material:SUS202. One set of 2500L Horizontal Mixer (with preheating) Recycle Hot Wind Heating
| 1-原料搅拌预烘部分 3.2米镙杆上料机1台(直径219mm) 优点：上料超快不卡顿，节省工时。 材质：SUS202不锈钢 2500L卧式搅拌机1台（带热预烘加热） 热风循环式 |
2-One set of Set of Vertical Raw material storage machine Volume: 3000L, Material: SUS202 With Blender and heating function +One set of Screw type Raw material Loading Machine Height:6.5m( Ø159mm) Material:SUS202.
| 2-立式储料机1台 容量：3000L，材质：SUS202 带预烘加热和搅拌功能 6.5米镙杆上料机1台（直径159mm） 材质：SUS202不锈钢 |
3-One set of Rotary Dehumidifier+Dust/Oil Collector The latest High Energy saving Honeycomb-Reel Dehumidifier (double channel) Air Volume: 1000cbm per Hour Moisture Content：≤80ppm Core Reel Made in Japan One set of dust remover system
| 3-最新款高效节能蜂巢转轮式除湿干燥机一套 风量: 1000立方/小时 除湿含水率: ≤80ppm 核心转轮: 采用日本进口 除尘除油过滤系统1套
|
4-One set of Crystallizing Bunker/Hopper Volume: 3000L, Material: SUS202 With Blender and heating function +One set of Screw type Raw material Loading Machine Height:7m/Ø159mm Material:SUS202. | 4-立式结晶料罐一台 容量：3000L材质：SUS202 带预烘加热和搅拌功能 镙杆上料机1台 高度7米（直径159mm） 材质：SUS202 |
5-One set of Main Extruder Machine One set of electrical control panel 1 set of additive feeder Screw Diameter (mm): 90mm Screw material: 38CrMoAL(Zhoushan) Gear Reducer : ZLYJ-225 (Guomao) Motor（kw）：37（WEG） Inverter(（kw）：37（invt） 1Set of Accuracy Melt Pump （100CC） Melt Pump Drive：Motor 3.7KW+ Inverter Control (INVT)+Belt 1 set of PET professional Fiber Filter(Filter Size: 2.5 ㎡ ) 1 set of Self-R&D Precise PET Mould Head Equips with advanced pressure sensor, Use Stable extrusion system, (make sure constant Pressure in the mould and around the filter)
| 5-挤出机一套 控制电箱一台 喂料机一组 螺杆直径（mm）：90 螺杆材质：38CrMoAL 硬齿面减速箱: ZLYJ-225 国茂 主机驱动: 37KW电机 WEG + 变频控制 英威腾 + 皮带传动 计量泵100CC: 定量给料，保证产品稳定 计量泵驱动: 5.5KW 电机（国茂） + 变频控制 英威腾 PET专业化纤换网器一套（双缸，换网面积2.5平方米） PET专用精密模头一套（计算机程序模拟流道，流动稳定无死角） 配有先进传感器（保证网前、网后及模口压力恒定，挤出稳定） |
6-One Set of Water Tank Material SUS304(2.0T) Size(mm): 3500×300×500 Water Level Adjustable Stable water temperature and pressure
| 6-水槽一套 材质: SUS304 厚:2.0T 尺寸(mm): 3500×300×500 水位可调 水温恒定，恒压进水系统 |
7-The 1st Traction unit(5 rollers) Rollers specifications : Ø270*L220mm*5PCS Material: Carbon Steel+ Hard chromium plating on surface Drive:4KW gear box motor+ Inverter (INVT)+ Double-row chain Speed(m/min)：0-100
| 7-第一五辊 五辊引轮规格(mm): Ø270*L220mm 辊轮材质: 碳钢 + 表面镀硬铬 驱动: 4KW齿轮减速电机（国茂 ）+ 变频控制英威腾 + 双排链条 速度范围(m/min)：0-100 |
8-Extension/Stretch oven Oven Size(mm)：4000×400×830 Material：SUS202 Thickness：1.5T Heating method: Circulating hot air (energy-saving) Fan(kw)：0.75 Heater（KW）：18 Motor of Drive Bearing（KW）：4.0 gear box motor+Inverter (INVT)+Chain 1Set of Mold Temperature Controller
| 8-拉伸烤箱 拉伸烘箱(mm): 4000×400×830 材质:SUS202厚:1.5T 加热方式: 热风循环，多道预热（可节能） 加热功率(KW):18 动力轴驱动: 4.0KW齿轮减速电机（国茂 ） + 变频控制 英威腾 + 链条 模温机一台
|
9-The 2nd 5Rollers- Extension Unit Roller Size(mm) ： D270×H220 *5PCS Material：Carbon steel+surface plated with hard chromium Drive:11KW gear box motor+ Inverter(INVT) coupling Speed(m/min)：0-200
| 9-第二五辊-拉伸 五辊引轮规格(mm): Ø270*L220mm 辊轮材质: 碳钢 + 表面镀硬铬 驱动: 11KW齿轮减速电机（国茂 ） + 变频控制英威腾 + 联轴器 速度范围(m/min): 0-200 |
10-The 3rd 5Rollers- Extension Unit Rollers specifications : Ø270*L220mm*5PCS Material：Carbon steel+surface plated with hard chromium Power transmission: coupling + gear Inverter：15KW/Reducer：11KW Speed(m/min)：0-200 PLC: Siemens
| 10-第三五辊-拉伸 五辊引轮规格(mm): Ø270*L220mm 辊轮材质: 碳钢 + 表面镀硬铬 驱动: 15KW齿轮减速电机（国茂 ） + 变频控制 英威腾 + 联轴器 速度范围(m/min): 0-200 PLC: 西门子
|
11-Embossing Machine Quantity: 1 set Embossing roller(mm):2-∮156×150 Embossing roller material: SKD-11（HRC60~62,High hardness and last longer） Motor: 2.2kw (Gear Reducer motor)+ Inverter(INVT)+Chain Speed range(m/min): 0-200
| 11-压花机 数量：1套 压花辊(mm): 2-∮156×150 压花轮材质: SKD-11（HRC60~62，硬度高，使用寿命长） 驱动: 2.2KW齿轮减速电机（国茂） + 变频控制 英威腾 + 链条 速度范围(m/min): 0-200 |
12-Shape Forming unit Size(mm):4000*400*700 Material SUS304Fan Motor:1.75kw Water tank size(mm):5000×290×170(SUS304) Material：SUS304 Water remove device:1.1KW
| 12-风冷定型系统 尺寸(mm)：4000×400×700 轴材质: SUS304 风扇功率: 1.75KW 定型水槽(KW): 5000×290×170 材质: SUS304 除水装置(KW): 1.1 |
13-The 4th Five Rollers - Traction Roller Size: Ø270*L220mm*5PCS Material:Carbon Steel+ Hard chromium plating on surface Motor: 4.0kw(Gear Reducer motor)+INVT Frequency Control+Double-row chain Speed range(m/min): 0-200
| 13-第四牵引五辊 五辊引轮规格: Ø270*L220mm 辊轮材质: 碳钢 + 表面镀硬铬 驱动: 4KW齿轮减速电机（国茂） + 变频控制 英威腾 + 双排链条 速度范围(m/min): 0-200 |
14-Rewinding Machine 2 Sets of Double Station Rewinding Machine(Manual) Torque motor: 6N.m 4stage with speed controller 100kgs Torque motor(set)：4 Winding number(pics): 4 Meter recorder (set):2 Paper Core size: 406*150mm
| 14-收卷机 两台双工位收卷机 力矩电机: 4级, 配调速器控制 力矩电机: 4 套 计米器: 2个 收卷盘: 4个 纸芯尺寸:406*150mm
|
15-Other Equipment/Spares Temperature controller: 2PCS Solid-state relay:2PCS Heating Pipe for Over: 2PCS Mould fork(PET1-2): 1PCS Small Guild wheel: 6PCS ON/OFF/Option Button: 4PCS of each Tool box:1PCS Heating stick for mould head: 3pcs Oven sensor wire 5M: 1PCS Mold Die block:5PCS Winder Gears: 5Sets | 15-其他设备/随机配件清单 温控器2个 固态继电器2个 烤箱发热管2条 模具叉pet（一出二）1个 小导轮6个 启动、停止和选择按钮各4个 小型工具箱1个 模头发热棒3条 5M烤箱感应线1条 模具5条/齿轮5组 |
Remarks: (1) The equipment bearing use the joint venture TR brand ; (2) The equipment deceleration motors use WANXIN; (3) the intelligent temperature controller adopts Fotek brand; the buttons, contactors and relays adopt Schneider. (4) The extruding screw, cylinder and reducer are made in Zhoushan, Zhejiang province (excellent products) ; (5) energy-saving motors are used in all motors, and WEG motors are used in main motors; (6) all shafts are heat-treated and grinded; (7) Machine main frame: 100 * 100 * 3.5 T (full thickness,national standard) ; | 备注： （1）设备轴承采用合资TR品牌轴承； （2）设备五辊减速电机采用国茂； （3）智能温控仪采用阳明品牌；按钮、接触器、继电器等电器采用施耐德； （4）螺杆、料筒、减速箱均采用浙江舟山产（优等品）； （5）所有电机采用节能电机，主机马达采用WEG电机； （6）所有轴均经过热处理及磨床精加工； （7）主机架：100*100*3.5T（足厚，国标）； |
FOB China.
- Delivery time: The Seller will hand over the goods to the buyer after 90 business days, excluding Saturdays, Sundays and public holidays (1-5 days for ship departure and customs clearance) Both parties sign the contract and the seller receives the full payment
- Place of delivery: at the buyer's address, the buyer will receive the goods and put in place to install
Set up :
- The Seller completes the installation of the equipment for the buyer within one week from the date the equipment is returned to the buyer's location.
Acceptance :
l Equipment that is considered valid must meet the following requirements:
l ü Specifications and functions of the machine match the content of this contract.
l ü Electrical, mechanical and control systems run smoothly.
l ü Run out sample products as required.
l ü Must have a certificate of quality of the place of production and documents attached to the machine.
ARTICLE 2: PAYMENT METHOD
v The buyer makes payment to the seller in 02 times by transfer to the seller's account.
v v First time: The buyer advances to the seller 30% of the contract value, right after the two parties sign the contract.
v v 2nd time: The buyer pays the seller 70% of the contract value, immediately after the seller sends the video of the acceptance of the camera and the picture, sends the standard sample to the buyer (IF YES). The seller will send a notice of delivery to the buyer.
ARTICLE 3: WARRANTY
Warranty period: within 12 months from the acceptance date of the equipment.
During the warranty period, if the equipment is defective by the manufacturer of the Seller, the Seller is responsible for the presence at the purchaser factory within 48 hours of being notified to repair the equipment. All costs incurred will be borne by the Seller.
(If the device is faulty by the user or is affected by unintended issues such as
Unstable electrical lines, collisions, natural disasters, unclean hygiene, the purchaser must be fully responsible for paying for repair and other replacement expenses)
ARTICLE 4: BUYER'S LIABILITY
6.1 Provide auxiliary systems and handover surface installation equipment. The auxiliary systems include: supply of supplies and preparation of 3 Phase 220V / 50Hz power supply systems for electrical appliances including switches, sockets, power wires, Electric three-phase electric switches, electric lines, steam-lines, gas lines, gas valves, pipes, elbows,
The buyer is responsible for dropping the item at the buyer's address to the correct location
6.2 The purchaser shall be responsible for sending the representative to receive the goods and taking over the test when the equipment has been installed and the instruction manual is used.
6.3 The buyer pays the seller under Article 4 of this contract.
6.4 The expenses such as as airplane, visa, travel expenses,other expenses for foreign engineers in china will be paid by the Seller.
6.5 The Other expenses such as pick up and see off ,dining, hotel for technical will be charged by the buyer,the buyer will be pay for the engineer 150-200USD each day .
ARTICLE 5: SELLER'S LIABILITY
7.1 Commitment to deliver the equipment to the purchaser in accordance with the type and design of this contract.
7.2 Vendors undertake:
Asian. Ensure time and progress of equipment handover
B. Assurance of quality and content in accordance with agreement requirements.
C. Vendors nominate technical staff to assist, install and guide the buyer to operate and use the equipment well when installing the machine.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
点击右上角
分享给朋友吧
© 2025 GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD all rights reserved
Contact us
GUANGDONG CHAMPION AUTOMATION TECHNOLOGY CO.,LTD
Telephone: 020-38912384
Email :
Sales@champion-automation.com
Fax: 020-38912463
Tel: 0086-18816899059, 15018408881
Add:Room 2116,No 101-1 ,Li Xin 12th street, Xin Tang Town, Zeng Cheng District, Guang Zhou, Guang Dong province, China
