OG-HDC110/80-900 Multilayer Plastic Sheet Coextrusion Machine

OG-HDC110/80-900 Multilayer Plastic Sheet Coextrusion Machine

一、Main Technical Parameter

二、Unit component

三、 Single machine form

（一）φ110 Extruder

1. Material of screw & cylinder: 38CrMoALA nitrogen treatment ;

Spraying bimetal alloy layer and nitriding treatment,High frequency quenching

2. Stainless steel hopper: thickness of steel plate is 1.5mm;

3. Motor form: AC motor (JINSHI);

4. Frequency converter: YIQU converter;

5. Reducer: the 280# reducer of extruder, hard tooth surface, high twist speed, low noise (HAIMAO）;

6. Heater: stainless steel heater, voltage adjusting solid relay non-contact output, winpak temperature controller PID automatic control;

7. Cooling: draught fan cooling, stainless steel cover, thickness of steel plate is 1.5mm;

8. Main Technical Parameter

(二）φ80 Extruder

1. The material of screw and cylinder: 38CrMoALA nitrogen treatment ;

Spraying bimetal alloy layer and nitriding treatment,High frequency quenching

2. Stainless steel hopper, thickness of steel plate: 1.5mm;

3. Motor form: AC motor (JINSHI);

4.Frequency converter: YIQU converter;

5.Reducer: the special 200#reducer of extruder, hard tooth surface, high twist speed, low noise (HAIMAO)

6.Heater: stainless steel heater, voltage adjusting solid relay non-contact output, winpak temperature controller PID automatic control;

7.Cooling: draught fan cooling, stainless steel cover, thickness of steel plate is 1.5mm;

8.Main Technical Parameter

(三）Sheet Molding Machine

1. Driving way: independent servo motor driving;

2. Transmission motor: Oblique style Wheel

3. Roller bearing: Japan NSK;

4. Adjustment way of roller gaps: gap inclined piece adjust;

5. Main Technical Parameter

（四）Edge cutting device

1. Material of blade: alloy steel with high quality;

2. Revolve way: blade carrier is adjustable;

（五） Cooling Device　　

1. Specification of running roller: φ80x900mm；

2. Steel roller, surface with anode hardening, 8　in all;

（六） Running Device

1. Running way: motor and worm reducer move directly;

2. Motor power: 0.37kw;

（七）Traction Device

1. Traction roller form: one rubber roller and one chromeplated steel roller;

2. Driving motor: AC frequency motor;

3. Frequency converter:YIQU converter;

4. Pressing way of rollers: rubber rolls cylinder press;

5. Main Technical Parameter

（八）Die head

(九）winding machine

四、Main Electrical Equipments

1. Temperature controller: Winpak

2. Solid relay:CZ

3. Relay: Omron 

4. Contactor:LG

5. Panel button:INT

6. Touch screen:Siemens

7. PLC:Siemens

五、Accessories, instruction and tools